Odyssey Certificate Requester version 1.0
(C) Copyright 2003-2004 Funk Software, Inc. All rights reserved.

***********************************************************************
README.TXT                                              August 27, 2004

    The odyssey Certificate Requester is a tool for requesting X509
    certificates from Odyssey CA for use with Odyssey Server or 
    Steel-Belted Radius.

    This file contains important information about system requirements,
    compatibility with other products, known problems, late-breaking 
    items that could not be covered in the manual, etc.

***********************************************************************
Contact information

    Funk Software, Inc.
    222 Third Street
    Cambridge, MA 02142

    (617) 497-6339          (Main number)
    (617) 491-6503          (Technical support number)
    support@funk.com        (Technical support email address)
    http://www.funk.com     (Web home page)

***********************************************************************
System Requirements

    Odyssey Certificate Requester runs on any of the following:
            Windows 2000 (any edition)
            Windows XP (any edition)
            Windows Server 2003

    Odyssey Certificate Requester is intended to be used with the
    Odyssey CA. Funk Software makes no claims with respect to
    interoperability with other certificate authorities.

    Certificates obtained with Odyssey Certificate Requester are
    intended to be used as server certificates for Steel-Belted RADIUS
    (version 4.50 or later) or Odyssey Server (version 2.0.1 or later).
    Funk Software makes no claims with respect to suitability for other
    uses.

***********************************************************************
Installing Odyssey Certificate Requester:


    * Double-click the OdysseyCertificateRequester.msi file, and an
      installation wizard guides you through the rest of the 
      installation/upgrade process.

***********************************************************************
Known Issues

   1) When a certificate is installed with Steel-Belted Radius by the
      requester, Steel-Belted Radius must be restarted in order for it
      to recognize the new certificate.  This can be done by stopping
      and restarting Steel-Belted Radius from the Services
      panel.