Odyssey Client for Windows Mobile, Version 4.50
(C) Copyright 2006 Juniper Networks, Inc. All rights reserved.


***********************************************************************
README.TXT                                                Aug 28, 2006

    This file contains important information about system requirements,
    known problems, and late-breaking items that could not be 
    covered in the manual.

***********************************************************************
Contact information

  Juniper Networks, Inc.
  1194 North Mathilda Ave
  Sunnyvale, CA 94089

    (408) 745-2000          (Main number)
    (408) 936-1576          (Technical support number)

    http://www.juniper.net  (web home page)


***********************************************************************
Operating System Requirements for the Installer 

    Odyssey Client for Windows Mobile Installer runs on  
    any of the following operating systems:

        Windows XP (Any edition)
        Windows 2000 (Any edition)


    Your PC must be running Internet Explorer 5.5 or higher.

***********************************************************************

 New Features in version 4.50:

  * Support for 240x240 screen resolution
  * Prompt for login name
  * EAP-POTP support
  * PEAP with inner TLS
  * Automatic certificate selection
  * Win9x installer is no longer supported


 New Features in version 4.03:

    * Windows Mobile 2005 support

 New Features in version 4.0:

    * Windows Mobile 2003 Second Edition support
    * CE.NET platforms support
    * EAP-FAST support
    * Anonymous outer identity for EAP-PEAP and EAP-FAST
    * WPA2 association
    * Updated for compatibility with Cisco ACS 3.2.3

 New Features in version 2.01:

    * Fixed an issue that caused extra reauthentications on some NIC
      drivers.

 New Features in version 2.0:

    * EAP-TLS support for Windows Mobile 2003 devices.

    * Additional device-based configuration options, including simple 
      trust.

    * Combined support for Pocket PC 2002 and Windows Mobile 2003
      devices.

New Features in version 1.32:

    * Unified client licensing: You can now purchase licenses that can
      be used on the Odyssey Client products for all supported 
      operating systems, subject to the terms of the End User License
      Agreement.

New Features in version 1.30:

    * Windows Mobile 2003 support


***********************************************************************

Operating System Requirements

 Odyssey Client for Windows Mobile runs on the following operating
 systems:
  
 * Windows Mobile 2005
 * Windows Mobile 2003
 * Windows Mobile 2003 
    Second Edition
 * CE .NET 
 * CE 5.0

***********************************************************************

Known Issues in version 4.50

  1. On some devices, it is possible to get into a mode where the
     device will fail to associate with any AP. Your AP will
     show up in a scan, but the device status remains indefinitely in 
    "searching for access point" until you soft reset the device.

  2. On some devices, WPA may not work.

  3. On some devices, after NIC soft off, Odyssey reports 
    'disconnected', instead of 'adapter not present'.

  4. Uninstall may result in a notification error. 
     You can avoid this problem by turning off the device 
     after uninstall.


***********************************************************************

Previous Known Issues for Odyssey Access Client

  1. If you are using the HP iPaq 545x series devices, you must update
  the driver for the built-in WLAN NIC to version number 3.2.4.133
  or later. The driver update is available from the HP website under 
  "HP iPAQ Pocket PC h5400 WLAN driver Update".

  2. If you use the Dell Axim series devices, if you do not reboot the
  device before you first use Odyssey, Odyssey does not show up in the
  Start Menu. Instead, it shows up in the Programs folder. You may see
  multiple links to Odyssey in the Programs folder.

  3. If you use the Agere 1401 CF card, after Power off-on, Odyssey 
  continues to say "Open and authenticated", when it is actually 
  disconnected.

  4. If you use the Agere 1401 CF card with driver version 7.82,
  install the drivers before installing Odyssey. 

  5. In order to use Wireless Zero Config, you need to either exit
  or disable Odyssey Client. 

  6. If your adapter is configured to use a static IP address, 
  you must reconfigure the static IP information after
  installing Odyssey Client.

  7. Certicom MovianVPN (3.x series) is in-compatible with Odyssey
  Client. The 4.x series is compatible, but you may have to reboot your 
  device after you install Odyssey.

  8. Do not install Odyssey 4.0 on an iPaq 4150/4350 running
  Windows Mobile 2003 with Wireless LAN driver version 2.0.53A.

  10. If you eject and re-insert an Omnikey Cardman SIM card reader,
  you may have to reboot the device for Odyssey to recognize it.

  11. If you eject/deactivate the WLAN card in use and insert/
  activate another WLAN card, you have to reboot the device
  for Odyssey to recognize the new WLAN card.

  12. If you use the Socket SDIO WLAN card, you might need to apply a
  ROM update to an iPaq device to avoid the SDIO from not working 
  after a Suspend/Resume or Soft Reset. Please refer to 
  the Socket and HP websites for more details on this.

  13. iPaq Wireless utility shows "amber" color and 
  Manager says "Driver not loaded" when Odyssey is 
  installed.